AllCall S5500 Recovery Mode and Fastboot Mode

Want to know How to Boot AllCall S5500 into Recovery Mode and Bootloader Mode or Fastboot Mode? Check out the instructions listed on this page to successfully boot AllCall S5500 into Recovery Mode and Bootloader Mode or Fastboot Mode.

AllCall S5500 Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

AllCall S5500 Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

AllCall S5500 Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: AllCall Rio X Recovery Mode and Factory Mode

Boot AllCall S5500 into Recovery Mode

Below are the methods using which you can boot AllCall S5500 into Recovery Mode.

Boot AllCall S5500 Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Boot Mode on the screen.
4. Now, choose Recovery Mode using the Volume Up button and select it using the Volume Down.
5. If the Android Bot with Red exclamation pops up, then press Volume Down + Power and click Volume Up once.
6. Now, your phone should boot into Recovery Mode.

Boot AllCall S5500 into Recovery using ADB command

1. First of all, install the AllCall S5500 USB Driver and ADB and Fastboot Drivers on your Windows computer.
2. Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to computer and open Command Prompt (CMD).
4. Now, enter the below command in CMD to boot AllCall S5500 into Recovery Mode.

   adb reboot recovery

Boot AllCall S5500 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot AllCall S5500 into Bootloader Mode or Fastboot Mode.

Boot AllCall S5500 Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Once the device is off, press and hold the Volume Up and Power button together for a few seconds.
3. Release the keys as soon as you see the Boot Mode on the screen.
4. Now, choose Fastboot Mode using the Volume Up button and select it using the Volume Down.
5. Now, your phone should boot into Fastboot Mode.

Boot AllCall S5500 Bootloader Mode/Fastboot Mode using ADB command

1. Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to the computer using a USB cable and open Command Prompt (CMD).
4. Enter the below command in the Command Prompt window.

   adb reboot bootloader

Boot AllCall S5500 into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.