How to Boot Gionee F100S Recovery Mode

Want to know How to Boot Gionee F100S into Recovery Mode? Check out the instructions listed on this page to successfully boot Gionee F100S into Recovery Mode.

Gionee F100S Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Also: Gionee S10 Lite Recovery Mode and Fastboot Mode

Boot Gionee F100S into Recovery Mode

Below are the methods using which you can boot Gionee F100S into Recovery Mode.

Boot Gionee F100S Recovery Mode using Hardware Buttons

First of all, power off your phone.
Now, press and hold the Volume Up and Power button together for a few seconds.

Release the keys as soon as you see the Android logo and wait for few seconds.
Now, press the Power button to enter into the Recovery Mode.
While holding down the Power key press the Volume Up button at once.

Boot Gionee F100S into Recovery using ADB command

First of all, install the Gionee F100S USB Driver and ADB and Fastboot Drivers on your Windows computer.
Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).

Now, enter the below command in CMD to boot Gionee F100S into Recovery Mode.
```
adb reboot recovery
```

Boot Gionee F100S into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Gionee F100S into Bootloader Mode or Fastboot Mode.

Boot Gionee F100S Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your phone.

Connect a USB cable to PC or Laptop.
Hold the Volume Down button for a few seconds and then connect the other end of the USB Cable to mobile.
Now, your phone should boot into Fastboot Mode.

Boot Gionee F100S Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).

Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```