How to Boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode and Fastboot Mode

Want to know How to Boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode and Bootloader Mode or Fastboot Mode? Check out the instructions listed on this page to successfully boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode and Bootloader Mode or Fastboot Mode.

Micromax Q414 Canvas Blaze 4G+ Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Micromax Q414 Canvas Blaze 4G+ Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Micromax Q414 Canvas Blaze 4G+ Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Micromax Bolt A58 Recovery Mode

Boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode

Below are the methods using which you can boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode.

Boot Micromax Q414 Canvas Blaze 4G+ Recovery Mode using Hardware Buttons

First of all, power off your phone.
Now, press and hold the Volume Up and Power button together for a few seconds.
Release the keys as soon as you see the Android logo and wait for few seconds.

Now, press the Power button to enter into the Recovery Mode.
While holding down the Power key press the Volume Up button at once.

Boot Micromax Q414 Canvas Blaze 4G+ into Recovery using ADB command

First of all, install the Micromax Q414 Canvas Blaze 4G+ USB Driver and ADB and Fastboot Drivers on your Windows computer.

Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Micromax Q414 Canvas Blaze 4G+ into Recovery Mode.
```
adb reboot recovery
```

Boot Micromax Q414 Canvas Blaze 4G+ into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Micromax Q414 Canvas Blaze 4G+ into Bootloader Mode or Fastboot Mode.

Boot Micromax Q414 Canvas Blaze 4G+ Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Now, press and hold the Volume Down and Power button together for a few seconds.

Now, your phone should boot into Fastboot Mode.

Boot Micromax Q414 Canvas Blaze 4G+ Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to the computer using a USB cable and open Command Prompt (CMD).
Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```