How to Boot Alcatel AT&T Trek HD 8.0" Recovery Mode

Want to know How to Boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode, Bootloader Mode or Fastboot Mode, and Download Mode? Check out the instructions listed on this page to successfully boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode, Bootloader Mode or Fastboot Mode, and Download Mode.

Alcatel AT&T Trek HD 8.0″ Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Alcatel AT&T Trek HD 8.0″ Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Alcatel AT&T Trek HD 8.0″ Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Alcatel AT&T Trek HD 8.0″ Download Mode allows users to flash ROM, Kernel, root packages (SuperSU), and perform system updates. It also helps restore the device to stock firmware from a custom firmware.

Also: Alcatel OT-5050S Pop S3 Recovery Mode

Boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode

Below are the methods using which you can boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode.

Boot Alcatel AT&T Trek HD 8.0″ Recovery Mode using Hardware Buttons

Power off your phone.
Once the device is off, press and hold the Volume Up + Power button together for a few seconds.

Release the Power button as soon as you see the Alcatel Logo on the screen.
Release the Volume Up button when the device boots into Recovery Mode.

Boot Alcatel AT&T Trek HD 8.0″ into Recovery using ADB command

First of all, install the Alcatel AT&T Trek HD 8.0″ USB Driver and ADB and Fastboot Drivers on your Windows computer.

Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Alcatel AT&T Trek HD 8.0″ into Recovery Mode.
```
adb reboot recovery
```

Boot Alcatel AT&T Trek HD 8.0″ into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Alcatel AT&T Trek HD 8.0″ into Bootloader Mode or Fastboot Mode.

Boot Alcatel AT&T Trek HD 8.0″ Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Plug one end of the USB cable to PC and while holding the Volume Down button connect the other end of the cable to your device.

Now, your phone should boot into Fastboot Mode.

Boot Alcatel AT&T Trek HD 8.0″ Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to the computer using a USB cable and open Command Prompt (CMD).
Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```

Boot Alcatel AT&T Trek HD 8.0″ into Download Mode

Power off your Phone.

Plug one end of the USB cable to PC and while holding the Volume Down + Volume Up button connect the other end of the cable to your device.
Release the Volume button once the device boots into Download Mode.
To exit the Download Mode, press and hold the Power button until the device reboots.