Allview A10 Lite Recovery Mode, Fastboot Mode and Factory Mode

Want to know How to Boot Allview A10 Lite into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode? Check out the instructions listed on this page to successfully boot Allview A10 Lite into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode.

Allview A10 Lite Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Allview A10 Lite Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Allview A10 Lite Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Allview A10 Lite Factory Mode is a hidden mode that helps test the device and clear eMMC.

Also: Allview C6 Quad 4G Recovery Mode

Boot Allview A10 Lite into Recovery Mode

Below are the methods using which you can boot Allview A10 Lite into Recovery Mode.

Boot Allview A10 Lite Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.
6. Now, your phone should boot into Recovery Mode.

Boot Allview A10 Lite into Recovery using ADB command

1. First of all, install the Allview A10 Lite USB Driver and ADB and Fastboot Drivers on your Windows computer.
2. Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to computer and open Command Prompt (CMD).
4. Now, enter the below command in CMD to boot Allview A10 Lite into Recovery Mode.

   adb reboot recovery

Boot Allview A10 Lite into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Allview A10 Lite into Bootloader Mode or Fastboot Mode.

Boot Allview A10 Lite Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold Volume Up and Power button together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Allview A10 Lite Bootloader Mode/Fastboot Mode using ADB command

1. Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to the computer using a USB cable and open Command Prompt (CMD).
4. Enter the below command in the Command Prompt window.

   adb reboot bootloader

Boot Allview A10 Lite into Factory Mode

1. First of all, power off the device.
2. Press and hold Volume Down and Power buttons together for few seconds.
3. Release the keys once the device boots into Factory Mode.