How to Boot Hisense E70 into Recovery Mode and Fastboot Mode

Want to know How to Boot Hisense E70 into Recovery Mode and Bootloader Mode or Fastboot Mode? Check out the instructions listed on this page to successfully boot Hisense E70 into Recovery Mode and Bootloader Mode or Fastboot Mode.

Hisense E70 Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Hisense E70 Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Hisense E70 Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Hisense E33 Recovery Mode and Fastboot Mode

Boot Hisense E70 into Recovery Mode

Below are the methods using which you can boot Hisense E70 into Recovery Mode.

Boot Hisense E70 Recovery Mode using Hardware Buttons

First of all, power off your phone.
Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
Release the keys as soon as you see the Hisense logo and wait for few seconds.

Now, your phone should boot into Recovery Mode.

Boot Hisense E70 into Recovery using ADB command

First of all, install the Hisense E70 USB Driver and ADB and Fastboot Drivers on your Windows computer.

Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Hisense E70 into Recovery Mode.
```
adb reboot recovery
```

Boot Hisense E70 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Hisense E70 into Bootloader Mode or Fastboot Mode.

Boot Hisense E70 Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.

Release the keys as soon as you see the Hisense logo and wait for few seconds.
Now, your phone should boot into Recovery Mode.
In the next step, select “Enter fastboot” using Volume keys and press the Power button to confirm.

Now, your phone should boot into Fastboot Mode.

Boot Hisense E70 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to the computer using a USB cable and open Command Prompt (CMD).
Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```