Huawei Y3 (2018) Recovery Mode, Fastboot Mode and Download Mode

Are you wondering How to Boot Huawei Y3 (2018) into Recovery Mode, Bootloader Mode or Fastboot Mode, and Download Mode? Then, follow the instructions listed on this page to successfully boot Huawei Y3 (2018) into Recovery Mode, Bootloader Mode or Fastboot Mode, and Download Mode.

Huawei Y3 (2018) Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Huawei Y3 (2018) Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Huawei Y3 (2018) Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Huawei Y3 (2018) Download Mode allows users to flash ROM, Kernel, root packages (SuperSU), and perform system updates. It also helps restore the device to stock firmware from a custom firmware.

Also: Huawei Ascend Y300 Recovery Mode and Fastboot Mode

Boot Huawei Y3 (2018) into Recovery Mode

Below are the methods using which you can boot Huawei Y3 (2018) into Recovery Mode.

Boot Huawei Y3 (2018) Recovery Mode using Hardware Buttons

1. Power off your phone.
2. Once the device is off, press and hold the Volume Up and Power buttons together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Recovery Mode.

Boot Huawei Y3 (2018) into Recovery using ADB command

1. First of all, install the Huawei Y3 (2018) USB Driver and ADB and Fastboot Drivers on your Windows computer.
2. Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to computer and open Command Prompt (CMD).
4. Now, enter the below command in CMD to boot Huawei Y3 (2018) into Recovery Mode.

   adb reboot recovery

Boot Huawei Y3 (2018) into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Huawei Y3 (2018) into Bootloader Mode or Fastboot Mode.

Boot Huawei Y3 (2018) Bootloader Mode/Fastboot Mode using Hardware Buttons

1. Power off your Phone.
2. Press and hold the Volume Up and Power buttons together for a few seconds.
3. Release all the buttons once you see the Android Boot Mode.
4. Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
5. Now, your phone should boot into Fastboot Mode.

Boot Huawei Y3 (2018) Bootloader Mode/Fastboot Mode using ADB command

1. Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to the computer using a USB cable and open Command Prompt (CMD).
4. Enter the below command in the Command Prompt window.

   adb reboot bootloader

Boot Huawei Y3 (2018) Download Mode

1. Power off your Phone.
2. Press and hold Volume Down + Volume Up buttons together for a few seconds.
3. Plug one end of the USB cable to PC and while holding these Keys connect the other end of the cable to your device.
4. Release the Volume buttons once the device boots into Download Mode.
5. To exit the Download Mode, press and hold the Power button until the device reboots.