How to Boot Mediacom SmartPad 10.1" S4 3G into Recovery Mode and Fastboot Mode

Are you wondering How to Boot Mediacom SmartPad 10.1″ S4 3G into Recovery Mode and Bootloader Mode or Fastboot Mode? Then, follow the instructions listed on this page to successfully boot Mediacom SmartPad 10.1″ S4 3G into Recovery Mode and Bootloader Mode or Fastboot Mode.

Mediacom SmartPad 10.1″ S4 3G Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Mediacom SmartPad 10.1″ S4 3G Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Mediacom SmartPad 10.1″ S4 3G Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Mediacom Phonepad Duo G510 Recovery Mode and Fastboot Mode

Boot Mediacom SmartPad 10.1″ S4 3G into Recovery Mode

Below are the methods using which you can boot Mediacom SmartPad 10.1″ S4 3G into Recovery Mode.

Boot Mediacom SmartPad 10.1″ S4 3G Recovery Mode using Hardware Buttons

Power off your phone.
Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
Release all the buttons once you see the Android Boot Mode.

Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
Now, your phone should boot into Recovery Mode.

Boot Mediacom SmartPad 10.1″ S4 3G into Recovery using ADB command

First of all, install the Mediacom SmartPad 10.1″ S4 3G USB Driver and ADB and Fastboot Drivers on your Windows computer.

Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Mediacom SmartPad 10.1″ S4 3G into Recovery Mode.
```
adb reboot recovery
```

Boot Mediacom SmartPad 10.1″ S4 3G into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Mediacom SmartPad 10.1″ S4 3G into Bootloader Mode or Fastboot Mode.

Boot Mediacom SmartPad 10.1″ S4 3G Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Press and hold Volume Up and Power button together for a few seconds.

Release all the buttons once you see the Android Boot Mode.
Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
Now, your phone should boot into Fastboot Mode.

Boot Mediacom SmartPad 10.1″ S4 3G Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).

Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```