Realme C53 Recovery Mode and Download Mode

Are you wondering How to Boot Realme C53 into Recovery Mode and Download Mode? Then, follow the instructions listed on this page to successfully boot Realme C53 into Recovery Mode and Download Mode.

Realme C53 Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Realme C53 Download Mode allows users to flash ROM, Kernel, root packages (SuperSU), and perform system updates. It also helps restore the device to stock firmware from a custom firmware.

Also: Realme C53 (India) Recovery Mode and Download Mode

Boot Realme C53 into Recovery Mode

Below are the methods using which you can boot Realme C53 into Recovery Mode.

Boot Realme C53 Recovery Mode using Hardware Buttons

1. First of all, power off your phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Now select the language by using Volume keys to navigate and the Power button to accept it.
   
4. Now, your phone should boot into Recovery Mode.

Boot Realme C53 into Recovery using ADB command

1. First of all, install the Realme C53 USB Driver and ADB and Fastboot Drivers on your Windows computer.
2. Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
3. Connect your device to computer and open Command Prompt (CMD).
4. Now, enter the below command in CMD to boot Realme C53 into Recovery Mode.

   adb reboot recovery

Boot Realme C53 Download Mode

1. Power off your Phone.
2. Now, press and hold the Volume Down and Power button together for a few seconds.
3. Now select the language by using Volume keys to navigate and the Power button to accept it.
   
4. Now, your phone should boot into Recovery Mode.
5. Connect the phone to the computer using the USB cable, tap the Ver 1.2 position 5 times, and then press the OK key to confirm.