How to Boot Teclast P10SE into Recovery Mode and Fastboot Mode

Are you looking for the instructions on How to Boot Teclast P10SE into Recovery Mode and Bootloader Mode or Fastboot Mode? Then your search ends here; on this page, we have shared instructions on how to boot Teclast P10SE into Recovery Mode and Bootloader Mode or Fastboot Mode.

Teclast P10SE Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Teclast P10SE Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Teclast P10SE Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Teclast P25 Recovery Mode and Fastboot Mode

Boot Teclast P10SE into Recovery Mode

Below are the methods using which you can boot Teclast P10SE into Recovery Mode.

Boot Teclast P10SE Recovery Mode using Hardware Buttons

First of all, power off your phone.
Press and hold the Volume Down + Power button together for a few seconds.
Release the Power button as soon as you see the Teclast Logo on the screen.

Release the Volume Down button when the device boots into Recovery Mode.

Boot Teclast P10SE into Recovery using ADB command

First of all, install the Teclast P10SE USB Driver and ADB and Fastboot Drivers on your Windows computer.

Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Teclast P10SE into Recovery Mode.
```
adb reboot recovery
```

Boot Teclast P10SE into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Teclast P10SE into Bootloader Mode or Fastboot Mode.

Boot Teclast P10SE Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Press and hold the Volume Down + Power button together for a few seconds.

Release the Power button as soon as you see the Teclast Logo on the screen.
Release the Volume Down button when the device boots into Recovery Mode.

In the next step, select “Enter fastboot” using Volume keys and press the Power button to confirm.
Now, your phone should boot into Fastboot Mode.

Boot Teclast P10SE Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).

Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```