How to Boot Teclast T50 into Recovery Mode and Fastboot Mode

Want to know How to Boot Teclast T50 into Recovery Mode and Bootloader Mode or Fastboot Mode? Check out the instructions listed on this page to successfully boot Teclast T50 into Recovery Mode and Bootloader Mode or Fastboot Mode.

Teclast T50 Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Teclast T50 Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Teclast T50 Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Teclast G18 3G Recovery Mode

Boot Teclast T50 into Recovery Mode

Below are the methods using which you can boot Teclast T50 into Recovery Mode.

Boot Teclast T50 Recovery Mode using Hardware Buttons

First of all, power off your phone.
Now, press and hold the Volume Down and Power button together for a few seconds.
Release the Power key as soon as you see the Teclast Logo on the screen.

But keep holding the Volume Down button to enter into the Recovery Mode.

Boot Teclast T50 into Recovery using ADB command

First of all, install the Teclast T50 USB Driver and ADB and Fastboot Drivers on your Windows computer.
Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Teclast T50 into Recovery Mode.
```
adb reboot recovery
```

Boot Teclast T50 into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Teclast T50 into Bootloader Mode or Fastboot Mode.

Boot Teclast T50 Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Now, press and hold the Volume Down and Power button together for a few seconds.
Release the Power key as soon as you see the Teclast Logo on the screen.

But keep holding the Volume Down button to enter into the Recovery Mode.
In the next step, select “Enter fastboot” using Volume keys and press the Power button to confirm.
Now, your phone should boot into Fastboot Mode.

Boot Teclast T50 Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).

Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```