How to Boot Tecno Spark 10C into Recovery Mode and Fastboot Mode

Are you looking for the instructions on How to Boot Tecno Spark 10C into Recovery Mode and Bootloader Mode or Fastboot Mode? Then your search ends here; on this page, we have shared instructions on how to boot Tecno Spark 10C into Recovery Mode and Bootloader Mode or Fastboot Mode.

Tecno Spark 10C Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Tecno Spark 10C Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Tecno Spark 10C Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Also: Tecno Spark Go 2023 Recovery Mode and Fastboot Mode

Boot Tecno Spark 10C into Recovery Mode

Below are the methods using which you can boot Tecno Spark 10C into Recovery Mode.

Boot Tecno Spark 10C Recovery Mode using Hardware Buttons

First of all, power off your phone.
Now, press and hold the Volume Up and Power button together for a few seconds.
Release the keys as soon as you see the Tecno logo and wait for few seconds.

Now, your phone should boot into Recovery Mode.

Boot Tecno Spark 10C into Recovery using ADB command

First of all, install the Tecno Spark 10C USB Driver and ADB and Fastboot Drivers on your Windows computer.
Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Tecno Spark 10C into Recovery Mode.
```
adb reboot recovery
```

Boot Tecno Spark 10C into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Tecno Spark 10C into Bootloader Mode or Fastboot Mode.

Boot Tecno Spark 10C Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Now, press and hold the Volume Up and Power button together for a few seconds.
Release the keys as soon as you see the Tecno logo and wait for few seconds.

Now, your phone should boot into Recovery Mode.
In the next step, select “Enter fastboot” using Volume keys and press the Power button to confirm.
Now, your phone should boot into Fastboot Mode.

Boot Tecno Spark 10C Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).

Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```