How to Boot Videocon Ultra 30 V50NL into Recovery Mode, Fastboot Mode and Factory Mode

Want to know How to Boot Videocon Ultra 30 V50NL into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode? Check out the instructions listed on this page to successfully boot Videocon Ultra 30 V50NL into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode.

Videocon Ultra 30 V50NL Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.

Videocon Ultra 30 V50NL Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.

Videocon Ultra 30 V50NL Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.

Videocon Ultra 30 V50NL Factory Mode is a hidden mode that helps test the device and clear eMMC.

Also: Videocon A22 Recovery Mode

Boot Videocon Ultra 30 V50NL into Recovery Mode

Below are the methods using which you can boot Videocon Ultra 30 V50NL into Recovery Mode.

Boot Videocon Ultra 30 V50NL Recovery Mode using Hardware Buttons

Power off your phone.
Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.

Release all the buttons once you see the Android Boot Mode.
Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
If the Android Bot with Red exclamation pops up, then press Volume Up and Power buttons together at once.

Now, your phone should boot into Recovery Mode.

Boot Videocon Ultra 30 V50NL into Recovery using ADB command

First of all, install the Videocon Ultra 30 V50NL USB Driver and ADB and Fastboot Drivers on your Windows computer.
Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.

Connect your device to computer and open Command Prompt (CMD).
Now, enter the below command in CMD to boot Videocon Ultra 30 V50NL into Recovery Mode.
```
adb reboot recovery
```

Boot Videocon Ultra 30 V50NL into Fastboot Mode / Bootloader Mode

Below are the methods using which you can boot Videocon Ultra 30 V50NL into Bootloader Mode or Fastboot Mode.

Boot Videocon Ultra 30 V50NL Bootloader Mode/Fastboot Mode using Hardware Buttons

Power off your Phone.
Press and hold Volume Up and Power button together for a few seconds.
Release all the buttons once you see the Android Boot Mode.

Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
Now, your phone should boot into Fastboot Mode.

Boot Videocon Ultra 30 V50NL Bootloader Mode/Fastboot Mode using ADB command

Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.

Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings → About Phone and tap on Build Number about 7-10 times.
Connect your device to the computer using a USB cable and open Command Prompt (CMD).
Enter the below command in the Command Prompt window.
```
adb reboot bootloader
```

Boot Videocon Ultra 30 V50NL into Factory Mode

First of all, power off the device.
Press and hold Volume Down and Power buttons together for few seconds.
Release the keys once the device boots into Factory Mode.