Want to know How to Boot Vortex Volt into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode? Check out the instructions listed on this page to successfully boot Vortex Volt into Recovery Mode, Bootloader Mode or Fastboot Mode, and Factory Mode.
Vortex Volt Recovery Mode allows a user to troubleshoot and fix problems with their device. In addition, recovery mode can access some core functions of the device, such as factory resetting the device, wiping cache, Installing updates, backup and restoring data, flash root packages and other zip mods, etc.
Vortex Volt Fastboot Mode or Bootloader Mode is used to re-flash system partitions on the device. It is an alternative to the recovery mode but is more advanced. It helps to modify or write data directly to your device's flash memory.
Vortex Volt Bootloader Mode or Fastboot Mode can be used to unlock the bootloader, flash a custom recovery (CWM, TWRP, Philz, etc.), flash stock ROM, flash custom image files, and more.
Vortex Volt Factory Mode is a hidden mode that helps test the device and clear eMMC.
Also: Vortex Beat 2.0 Recovery Mode, Fastboot Mode and Factory Mode
Boot Vortex Volt into Recovery Mode
Below are the methods using which you can boot Vortex Volt into Recovery Mode.
Boot Vortex Volt Recovery Mode using Hardware Buttons
- Power off your phone.
- Once the device is off. Press and hold the Volume Up and Power button together for a few seconds.
- Release all the buttons once you see the Android Boot Mode.
- Use the Volume Up button to select Recovery Mode from the list of Boot Options and press Volume Down to confirm.
- If the Android Bot with Red exclamation pops up, then press the Power buttonΒ at once.
- While holding down the Power key press the Volume Up button at once.
Boot Vortex Volt into Recovery using ADB command
- First of all, install the Vortex Volt USB Driver and ADB and Fastboot Drivers on your Windows computer.
- Now, enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings β About Phone and tap on Build Number about 7-10 times.
- Connect your device to computer and open Command Prompt (CMD).
- Now, enter the below command in CMD to boot Vortex Volt into Recovery Mode.
adb reboot recovery
Boot Vortex Volt into Fastboot Mode / Bootloader Mode
Below are the methods using which you can boot Vortex Volt into Bootloader Mode or Fastboot Mode.
Boot Vortex Volt Bootloader Mode/Fastboot Mode using Hardware Buttons
- Power off your Phone.
- Press and hold Volume Up and Power button together for a few seconds.
- Release all the buttons once you see the Android Boot Mode.
- Use the Volume Up button to select Fastboot Mode from the list of Boot Options and press Volume Down to confirm.
- Now, your phone should boot into Fastboot Mode.
Boot Vortex Volt Bootloader Mode/Fastboot Mode using ADB command
- Assuming ADB and Fastboot Drivers and USB Drivers installed on your computer.
- Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing, go to Settings β About Phone and tap on Build Number about 7-10 times.
- Connect your device to the computer using a USB cable and open Command Prompt (CMD).
- Enter the below command in the Command Prompt window.
adb reboot bootloader
LEAVE A REPLY